
Support étrier AV 6P AP / fusée M S1 = 2 x 235.00 = 470.00 HT
Precio : 564.00 € TTC (x1)
Compte tours Stack ST400 = 656.67 € ht
Precio : 788.00 € TTC (x1)

Kit modification pour conserver récepteur et butée embrayage origine sur cloche moteur S14 - 180.00 HT
Precio : 215.28 € TTC (x1)

Filtre à essence (2x14/150) - 28.50 HT
Precio : 34.20 € TTC (x1)

Carter de gros pont ALU type 210 (6.4 kg) - 2399.26 HT
Precio : 2879.11 € TTC (x1)

Rotule de tirant de chasse sur AV de berceau pas 3/4 AG (petit contre écrou)= 2 x 162.00 = 324.00 HT
Precio : 388.80 € TTC (x1)
Arbre embrayage S42 - 430.00 HT
Precio : 516.00 € TTC (x1)

Rotule grand angle 3/4 (petit contre écrou) de tirant de chasse "côté roue" S1/ORIG ET M D ET G = 2 x 178.01 = 356.02 HT
Precio : 427.22 € TTC (x1)

Tableau de bord Stack complet 10500 TR avec sonde - 1490.00 HT
Precio : 1788.00 € TTC (x1)

Kit support et palonnier de système accélérateur = 180.00 HT
Precio : 216.00 € TTC (x1)

Câble d'accélérateur papillon origine (dble coude) - 62.00 HT
Precio : 74.40 € TTC (x1)

Kit 12 boulons de bol fixation disque (long 26 sous tête) = 46.33 HT
Precio : 55.60 € TTC (x2)

Entretoise alu inf de fixation amort. AR = 4 x 14.50 = 58.00 HT
Precio : 69.60 € TTC (x1)
Kit faisceau caisse complet avec disjoncteurs thermiques - 2800.00 HT
Precio : 3348.80 € TTC (x1)

Support de disjoncteurs thermiques clipsables à visser - 30.60 HT (x4) (PLUS LIVRABLE)
Precio : 36.72 € TTC (x2)

Câble accélérateur - 55.70 HT
Precio : 66.84 € TTC (x1)

Gros radiateur d huile sous radiateur d eau - 282.61 HT
Precio : 338.00 € TTC (x1)

Supports de chasse réglables sur rotule 2 x 168.48 HT - 336.96 HT
Precio : 403.00 € TTC (x1)

Support Alu pour disjoncteurs et coupe circuit - 130.00 HT
Precio : 156.00 € TTC (x1)
Kits boulonnerie : 2 berceaux, 2 mains/longeron, 2 mains/fusée,
contre-écrous de rotules 2 x 85.00 HT - 170.00 HT
Precio : 204.00 € TTC (x1)

Bagues de coulisse amortisseur (diamètre 41) 2 x 35.01 HT - 70.02 HT
Precio : 84.02 € TTC (x1)

Etriers de frein AR AP 4 pistons 2 x 659.78 HT - 1319.56 HT
Precio : 1583.47 € TTC (x1)

Berceau d'origine - 478.54 HT
Precio : 574.25 € TTC (x1)
Chapeaux de ressort spéciaux 2 x 49.75 HT - 99.50 HT
Precio : 119.40 € TTC (x1)

Volant noir (T90 mm) 2 ou 3 branches - 119.57 HT
Precio : 143.48 € TTC (x1)

Lobro renforcé diam 108 ep. 40 28c = 267.00 HT (pièce)
Precio : 320.40 € TTC (x1)

Bol avant GR.A "anodisé" - + 30€ ht
Precio : 0.00 € TTC (x1)

Kit coussinets teflon - 48.00 € HT
Precio : 57.60 € TTC (x1)

Ecrou de moyeu AR - 9.80 € ht
Precio : 11.76 € TTC (x1)

Anodisation de nos pièces Alu Couleurs au choix : noir, bleu, rouge, orange (prix par pièce de 15 à 30 euros selon modèle)
Precio : 0.00 € TTC (x1)

Joint porte filtre à huile - 5.60 HT
Precio : 6.72 € TTC (x1)

Tulipe courte pour boîte SADEV - 182.00 HT
Precio : 218.40 € TTC (x1)

Chape support rotule sur berceau à souder 2 x 48.00 HT - 96.00 HT
Precio : 114.82 € TTC (x1)

Préparation berceau (renfort + support de barre ) = 250.00 HT
Precio : 300.00 € TTC (x1)
Plaquettes de frein de 150.00 à 340.00 euros selon choix
Precio : 0.00 € TTC (x1)

Butée GR.A = 280.29 € HT
Precio : 336.35 € TTC (x1)

Connectique de communication pour boîtier SRA-E - 49.00 HT
Precio : 58.60 € TTC (x1)

Sonde T° 150°C 10 x 100 Spécifique STACK - 73.66 HT
Precio : 88.39 € TTC (x1)

Support Alu pour fixation disjoncteurs et coupe circuit - 95.00 HT
Precio : 114.00 € TTC (x1)

Mécanisme embrayage diamètre 184 (bi-disques)- 794.00 HT
Precio : 952.80 € TTC (x1)

Plaque instrumentation Alu nue à peindre ou pose feutrine - 115.00 € HT
Precio : 138.00 € TTC (x1)

Potentiomètre papillon (S42) - 75.00 HT
Precio : 90.00 € TTC (x1)

Moyeu de volant (AP90)- 69.00 HT
Precio : 82.80 € TTC (x1)

Support alternateur / D.A S42 - 87.75 HT
Precio : 105.30 € TTC (x1)

Plaque tableau de bord = 45.00 HT
Precio : 54.00 € TTC (x1)

Ensemble fiche Potentiomètre S14 - 23.50 HT
Precio : 28.20 € TTC (x1)

Tirants de chasse 2 x 225.00 = 450.00 HT
Precio : 540.00 € TTC (x1)

Préparation du berceau - 1579.43 HT
Precio : 1895.39 € TTC (x1)

Thermostat avec sortie sonde. - 153.00 HT
Precio : 183.60 € TTC (x1)

Rotule de train AR de bras 5/8 D = 3 rotules / côté x 2 soit 6 x 138.00 = 828.00 HT
Precio : 993.60 € TTC (x1)

Cale créneaux ZF (pour autobloquant et glissement limité) Gros Pont - 68.80 HT
Precio : 82.28 € TTC (x1)

Goujons de roue type Prodrive avec écrou (Prix unitaire)- 31.00 HT
Precio : 37.20 € TTC (x1)
Kit boulonnerie, fixations sup. et inf. / amortisseur - 99.50 HT
Precio : 119.40 € TTC (x1)

Emetteur pression essence ou huile 0-10 BARS - 179.40 HT
Precio : 215.28 € TTC (x1)

Moyeu AV type Prodrive zingué + 30€ HT
Precio : 0.00 € TTC (x1)
Ressorts Rallye 2 x 125.00 HT - 250.00 HT
Precio : 300.00 € TTC (x1)

Coussinets de bielle Motorsport Diamètre 45 Moteur S14/7 (Prix unitaire)- 49.90 HT
Precio : 59.88 € TTC (x1)

Etrier AV GR.A
Precio : 0.00 € TTC (x1)

Kit coussinets teflon - 48.00 € HT
Precio : 57.60 € TTC (x1)

Poussoirs Motorsport 3.30 / 42 grammes (prix unitaire)- 117.00 HT
Precio : 139.93 € TTC (x1)

Bol avant GR.A "non traité" = 249.00 HT
Precio : 298.80 € TTC (x1)
Kit boulonnerie spéciale de cardan - 56.86 HT
Precio : 68.23 € TTC (x1)

Piston complet S14 diam. 93,32 /alesage 93.40 pour course 72.60 (bielle longue)- 250.00 HT
Precio : 300.00 € TTC (x1)

Kit supports alu de barre stab AV = 2 x 35.00 = 70.00 HT
Precio : 84.00 € TTC (x1)

Durite recyclage huile de reniflar = 35.21 HT
Precio : 42.25 € TTC (x1)

Biellette de barre stab réglable / rotule de diam 10 = 2 x 130.00 = 260.00 HT
Precio : 312.00 € TTC (x1)

Rotules de berceau (petite tête pour passage fourche berceau) 2 x 268.33 = 536.66 HT
Precio : 643.99 € TTC (x1)

Récepteur embrayage léger en Alu - 125.00 HT
Precio : 149.50 € TTC (x1)

Flasque INT de moyeu AR - 317.00 HT
Precio : 380.40 € TTC (x1)

Porte butée - 185.06 € HT
Precio : 222.07 € TTC (x1)
Kits boulonnerie cardan 2 x 29.68 HT - 59.36 HT
Precio : 71.00 € TTC (x1)
Arbre à cames S14 - 300 ° levée 12.50 (prix unitaire)- 780.02 HT
Precio : 932.90 € TTC (x1)

Autobloquant 75 % Motorsport (188) - 1890.00 HT
Precio : 2268.00 € TTC (x1)

Carter central boite Getrag taillé dans la masse - 3200.00 € ht
Precio : 3840.00 € TTC (x1)

Biellette de direction côté crémaillère mâle 2 x 68.14 HT - 136.28 HT
Precio : 163.00 € TTC (x1)

Rotule de crapotine (diam. 18 int.) 2 x 99.80 = 199.60 HT
Precio : 239.52 € TTC (x1)

Couple petit pont 5.28 (188mm) - 1580.00 HT
Precio : 1896.00 € TTC (x1)

Trappe de toit 100 % Carbone - 360.50 HT
Precio : 432.60 € TTC (x1)

Flexible haute pression D.A SP préformé - 224.00 HT
Precio : 268.80 € TTC (x1)

Kit boulonnerie rondelle / cale pour support étrier pour jambe d'origine / étrier = 2 x 42.00 = 84.00 € ht
Precio : 100.80 € TTC (x1)

Poulie de pompe de DA décalée / S42 - 44.31 HT
Precio : 53.00 € TTC (x1)

Couple conique 3.91 Gros pont (210mm)- 1285.00 HT
Precio : 1536.86 € TTC (x1)

Tuyau de remplissage de D.A - 35.00 HT
Precio : 41.86 € TTC (x1)

Boîtier de régulation pression - 278.53 HT
Precio : 334.24 € TTC (x2)

Embout de fil à bougie pour bobine creuse (prix unitaires)- 22.30 HT
Precio : 26.76 € TTC (x1)
Kit de toutes les douilles et entretoises de train AV = 194.80 HT
Precio : 233.76 € TTC (x1)

Rotule de berceau (sans fourche) - 192.03 € HT
Precio : 230.44 € TTC (x1)

Kit complet EVO 1 avec disques (356), étriers AP 6 pistons, bols, jeu de plaquettes et kit boulons/cales de fixation
Precio : 0.00 € TTC (x1)
Soupape échappement moteur S14 (la pièce) de 63 euros à 195 euros
Precio : 0.00 € TTC (x1)

Écrou moyeu AV - 32.80 HT
Precio : 39.36 € TTC (x1)
Total : 38413.19 € TTC