
Kit adaptation coupure sur boîte séquentielle - 253.34 HT
Precio : 304.01 € TTC (x1)

Sonde température air
Precio : 69.00 € TTC (x1)

Tirants de chasse 2 x 225.00 = 450.00 HT
Precio : 540.00 € TTC (x1)
Pochette complète de joints et bouchons pour boite manuelle - 98.80 HT
Precio : 118.16 € TTC (x1)
Barre anti-rapprochement AV Inox
Precio : 163.00 € TTC (x1)

Collecteur 4 en 2 et 2 en 1 diamètre 48 mm - 2799.33 HT
Precio : 3348.00 € TTC (x1)

Joint de Plaque AR de vilebrequin - 8.80 HT
Precio : 10.53 € TTC (x1)

Plaque de chauffage - 135.00 HT
Precio : 162.00 € TTC (x1)

Câble de liaison Ethernet (entre boîtier et ordinateur)- 17.56€ HT
Precio : 21.00 € TTC (x2)

Douille de centrage Arbre de transmission - 28.30 HT
Precio : 33.96 € TTC (x1)

Biellette pour direction + directe (1re série)
Precio : 0.00 € TTC (x1)

Injecteur Petit débit pour 1ère rampe (prix unitaire)
Precio : 125.58 € TTC (x2)

Demi-arbre trans. pour boîte Manuelle pour moteur S14 - 479.93 HT
Precio : 574.00 € TTC (x1)
Ressorts de soupape SRD7 gros diamètre - 16 x 49.96 HT - 799.36 HT
Precio : 956.03 € TTC (x1)

Courroie Alternateur pour gros alternateur (140 AMP) - 32.00 HT
Precio : 38.40 € TTC (x1)

Disques spéciaux Percés (diamètre 312) 2 x 345.00 = 690.00 HT
Precio : 828.00 € TTC (x1)

Tuyau de remplissage de D.A - 35.00 HT
Precio : 41.86 € TTC (x1)

Lobro renforcé diam 108 ep. 40 28c = 267.00 HT (pièce)
Precio : 320.40 € TTC (x1)

Double Interface adaptation S42 (pour boîte séquentielle 26kg)- 1203.27 HT
Precio : 1443.92 € TTC (x1)

Boulon de bielle renforcé (prix unitaire)- 33.53 HT
Precio : 40.10 € TTC (x1)

Visco nu 8/88 % - 2578.74 HT
Precio : 3094.45 € TTC (x1)

Tendeur alternateur - 65.50 HT
Precio : 78.60 € TTC (x1)

Porte pommeau de vitesse coudé - 167.23 HT
Precio : 200.68 € TTC (x1)

Kit 16 ressorts de soupapes + coupelles supérieures Titane et coupelles inférieures (Moteur S14) - 691.47 HT
Precio : 829.76 € TTC (x1)
Barre anti-rapprochement Alu spéciale compétition;Barre anti-rapprochement Alu spéciale compétition
Precio : 263.00 € TTC (x1)

Double entretoise alu du bras AR de réglage (17 mm) bras / berceau = 4 x 16.50 = 66.00 HT
Precio : 79.20 € TTC (x1)

Photo train AR monté
Precio : 0.00 € TTC (x2)

Protection de plancher intégral en kevlar/ carbone - 2 x 420 = 840.00 € ht
Precio : 1008.00 € TTC (x1)

Roulements AR 2 x 98.24 HT - 196.48 HT
Precio : 235.00 € TTC (x1)

Tulipe courte pour boîte SADEV - 182.00 HT
Precio : 218.40 € TTC (x2)

Kit plaques d'appui avec rondelles frein (pour une cardan) - 34.80 € ht
Precio : 41.76 € TTC (x1)

Liteau à coussinet d'echappement S42 - 1089.00 HT (dispo. en date du 13/02/2017)
Precio : 1306.80 € TTC (x1)
Circlips de roulement 2 x 5.80 HT - 11.60 HT
Precio : 13.88 € TTC (x1)
Bras de triangle 2 x 299.75 HT - 599.50 HT
Precio : 717.00 € TTC (x1)

Bol avant GR.A "non traité" = 249.00 HT
Precio : 298.80 € TTC (x1)
Arbre de transmission complet - 779.26 HT
Precio : 935.11 € TTC (x2)

Câble d'accélérateur long pour guillotine - 65.80 HT
Precio : 78.96 € TTC (x1)

Compte tour Stack ST200 0.4-10.5 D.80 noir - 420.83 HT
Precio : 505.00 € TTC (x1)

Kit soufflet tôle / cardan - 87.67 HT
Precio : 105.20 € TTC (x2)
Support de filtre à huile - 234.69 HT
Precio : 280.69 € TTC (x3)

Rotules de pivot renforcé - 2 x 38.50 = 77.00 HT
Precio : 92.40 € TTC (x2)

Ventilateur soufflant diam. 330 - 131.00 HT
Precio : 157.20 € TTC (x1)

Kit coussinets teflon - 48.00 € HT
Precio : 57.60 € TTC (x1)

Trappe de toit Carbone / Fibre - 339.00 HT
Precio : 405.44 € TTC (x1)

Kit bouchon / goulotte - 192.00 HT
Precio : 230.40 € TTC (x1)
Huile spéciale autobloquant - 38.46 HT
Precio : 46.15 € TTC (x1)

Intermédiaire avec Y en diamètre 63 mm - 479.93 HT
Precio : 574.00 € TTC (x1)

EVO 1 des triangles AR réglables renforcés sur voie étroite (recule prise amortisseur et barre de renfort + réglage Prodrive)- 479.93 HT
Precio : 574.00 € TTC (x1)

Ressorts de soupape ECH S42 pour soupape Titane (prix pièce)- 40.25 HT
Precio : 48.30 € TTC (x1)

Moyeux AV goujonnés en diam.14 - 2 x 373.00 = 746.00 HT
Precio : 895.20 € TTC (x1)

Lève rapide AR SP M3 GR.A - 285.00 € HT
Precio : 342.00 € TTC (x1)

Support AV étrier / fusée prodrive
Precio : 0.00 € TTC (x1)

Poussoir Méca Ø 37,5 x 28 x 4.50 / 55 grammes (Prix unitaire)- 48.00 HT
Precio : 57.41 € TTC (x1)

Coussinets de bielle EVO2 (prix pièce)- 42.90 HT
Precio : 51.31 € TTC (x1)

Barre anti-rapprochement Alu réglable
Precio : 218.00 € TTC (x1)

Emetteur pression essence ou huile 0-10 BARS - 179.40 HT
Precio : 215.28 € TTC (x1)

Disque de friction DS (diamètre 88 / 23C / 2 mm) pour autobloquant et glissement limité - Petit Pont - 72.52 HT
Precio : 87.02 € TTC (x1)
Coupelles inférieures de ressort de soupape 16 x 18.50 HT - 296.00 HT
Precio : 354.00 € TTC (x1)

Potentiomètre (capteur papillon pour pipe) S14 - 283.00 HT
Precio : 339.60 € TTC (x1)

Silentbloc support échappement / traverse - 6.80 HT
Precio : 8.13 € TTC (x1)

Pipe admission S42 / 4 papillons - 982.44 HT
Precio : 1175.00 € TTC (x1)

Support Alu de capteur phasage S14- 58.00 HT
Precio : 69.37 € TTC (x2)

Kit Rotor Stator pour réfection pompe à huile S14 - 150.00 HT
Precio : 180.00 € TTC (x1)

Kit joint carter de distribution "partiel"
(seulement si on change le joint de culasse) 15.80€ HT
Precio : 18.90 € TTC (x1)

Liteau à coussinet d'admission S42 - 1089.00 HT (dispo. en date du 13/02/2017)
Precio : 1306.80 € TTC (x1)

Bols de disque EVO 2 (12T / 240)- 2 x 311.99 = 623.98 HT
Precio : 748.78 € TTC (x2)

Photo train AR monté
Precio : 0.00 € TTC (x1)

Plaque console Carbone (non percée)- 55.02 HT
Precio : 66.02 € TTC (x3)

Etrier AV GR.A
Precio : 0.00 € TTC (x1)

Support guide poussoir Moteur S42 (prix unitaire)- 62.00 HT
Precio : 74.15 € TTC (x1)

Gros radiateur eau 100 % Alu - 536.00 HT
Precio : 643.20 € TTC (x1)

Support boitier GR.A "Motronic" - 135.00 HT
Precio : 162.00 € TTC (x1)

Cale-pied co-pilote Carbone - 215.00 HT
Precio : 258.00 € TTC (x2)

Boîte 6 séquentielle nue (26 Kg)- 8798.05 HT
Precio : 10557.66 € TTC (x1)

Crapotines complètes (petit diamètre) réglables en hauteur 2 x 419.60 HT - 839.20 HT
Precio : 1007.04 € TTC (x1)

Boîte 6 séquentielle seule (37 Kg / rapports prédéfinis)- 12 209.03 HT
Precio : 14650.84 € TTC (x1)

Contacteur de bte sequentielle - 25.78 HT
Precio : 30.94 € TTC (x1)
Kits boulonnerie : 2 berceaux, 2 mains/longeron, 2 mains/fusée,
contre-écrous de rotules 2 x 85.00 HT - 170.00 HT
Precio : 204.00 € TTC (x1)

Connectique de communication pour boîtier SRA-E - 49.00 HT
Precio : 58.60 € TTC (x2)

Butée GR.A = 280.29 € HT
Precio : 336.35 € TTC (x1)

Protection de compartiment sous moteur - 151.96 HT
Precio : 182.35 € TTC (x1)

Coupelle de ressort inf. ADM S42 (prix pièce) - 28.00 HT
Precio : 33.60 € TTC (x1)

Kit fourches berceau (non obligatoire) à monter avec renforts 2 x 187.71 HT - 375.42 HT
Precio : 449.00 € TTC (x1)

Supports latéraux Droit et Gauche pour gros pont 2 x 130.00 HT - 260.00 HT
Precio : 310.96 € TTC (x2)

Piston tendeur de chaine S42 - 144.00 HT
Precio : 172.80 € TTC (x1)

Filtre à essence - 35.80 HT
Precio : 42.96 € TTC (x3)

Kit frein AV disques diamètre 345 avec étriers, supports étrier, plaquettes HP et boulonnerie
Precio : 0.00 € TTC (x1)
Kit de toutes les douilles et entretoises de train AV = 194.80 HT
Precio : 233.76 € TTC (x1)

Rotule de biellette de barre Stab AV 2 x 28.09 HT - 56.18 HT
Precio : 67.18 € TTC (x1)

Coupelle de ressort inf. ECH S42 (prix pièce)- 28.00 HT
Precio : 33.60 € TTC (x1)

Kit refroidissement huile complet - 683.00 HT
Precio : 819.60 € TTC (x2)
Flasque de fixation sur cornet origine - 74.41 HT
Precio : 89.00 € TTC (x1)

Usinage poulie réglable = 45.00 HT (P.U.)
Precio : 54.00 € TTC (x1)

Pochette de joints pour boite 6 Sadev = 142.00 HT
Precio : 170.40 € TTC (x1)

Bol de disque AR 12 trous(prix unitaire)- 248.00 HT
Precio : 297.60 € TTC (x1)

Arceau 6 points avec centrale diam. 50 (modifiable annexe J) - 734.17 ht
Precio : 881.00 € TTC (x1)

Cale pied pilote carbone - 143.00 HT
Precio : 171.60 € TTC (x1)

Coupelles longues 2 x 79.85 - 159.70 HT
Precio : 191.64 € TTC (x1)
MO assemblage, montage et préréglage - 369.57 HT
Precio : 442.00 € TTC (x1)

Flexible haute pression D.A SP préformé - 224.00 HT
Precio : 268.80 € TTC (x2)

Filtre à air double cône SP boîte à air DELAGE Sport - 99.50 HT
Precio : 119.00 € TTC (x1)

Joints de haut d'amortisseur (diamètre 41) 2 x 29.17 HT - 58.34 HT
Precio : 70.01 € TTC (x1)

Biellette de direction côté crémaillère mâle 2 x 68.14 HT - 136.28 HT
Precio : 163.00 € TTC (x1)
Soupape admission Motorsport (prix unitaire)- 196.49 HT
Precio : 235.00 € TTC (x1)

Durite inférieure de radiateur eau - 37.63 HT
Precio : 45.00 € TTC (x1)

Kit boulonnerie rondelle / cale pour support étrier pour jambe d'origine / étrier = 2 x 42.00 = 84.00 € ht
Precio : 100.80 € TTC (x1)
Pare choc AR polyesther - 342.00 HT
Precio : 410.40 € TTC (x1)

Gros radiateur eau alu boite plastique - 430.00 HT
Precio : 516.00 € TTC (x1)
Modification autobloquant de 25% à 75% - 980 HT
Precio : 1176.00 € TTC (x1)
Filtre à air GrA type Prodrive - 127.00 € HT
Precio : 152.40 € TTC (x1)

Entretoise alu inf de fixation amort. AR = 4 x 14.50 = 58.00 HT
Precio : 69.60 € TTC (x1)
Pont origine complet neuf en "échange standard" Rapport 3.62 - 1927.93 HT
Precio : 2305.80 € TTC (x1)

Chape support rotule sur berceau à souder 2 x 48.00 HT - 96.00 HT
Precio : 114.82 € TTC (x2)

Boîtier de gestion électronique SRA-E - 1395.00 € HT
Precio : 1668.42 € TTC (x1)

Amortisseurs Bilstein Alu AR - 2 x 345.74 HT - 691.48 HT
Precio : 829.78 € TTC (x2)

Doigt Rotor S14 - 59.01 € HT
Precio : 70.81 € TTC (x1)

Collecteur S42 1.3 / 4.2 long = 2500.00 HT
Precio : 3000.00 € TTC (x1)

Kit cales butée pour montage embrayage bi-disques avec Volant moteur EVO1 - 53.51 HT
Precio : 64.00 € TTC (x1)

Kit boulonnerie support étrier (fusée TDC) = 32.00 € ht (pour un support)
Precio : 38.40 € TTC (x1)

Triangles renforcés usinés diam.20 - 2 x 382.00 = 764.00 € ht
Precio : 916.80 € TTC (x1)

Biellette réglable sur rotule de pipe admission - 95.00 HT
Precio : 114.00 € TTC (x1)

Panneau de porte Droit Carbone - 250.00 HT
Precio : 299.00 € TTC (x1)
Joint de culasse Renforcé Métal Epaisseur 1.80 - 275.00 HT
Precio : 328.90 € TTC (x1)

Silentblocs de bas radiateur renforcés vissés = 2 x 25 = 50.00 ht
Precio : 60.00 € TTC (x2)

Joint de coffre ultra léger (L.3.40) - 79.00 HT
Precio : 94.80 € TTC (x1)
Boîtier papillon - 599.50 HT
Precio : 717.00 € TTC (x1)

Ressort compensateur de mouvement - 2 x 35.00 = 70.00 HT
Precio : 84.00 € TTC (x2)

Récepteur embrayage léger en Alu - 125.00 HT
Precio : 149.50 € TTC (x1)
Modif pont autobloc 75% (modèle 210) - 1480.00 HT
Precio : 1776.00 € TTC (x1)

Préparation du berceau - 1579.43 HT
Precio : 1895.39 € TTC (x1)

Plaque plancher Carbone (pilote)- 40.01 HT
Precio : 48.01 € TTC (x2)

Papillon admission complet pour moteur S42
Precio : 1530.88 € TTC (x1)

T de remplissage et support sonde (eau) Moteur S14 et S42 - 75.00 HT
Precio : 89.70 € TTC (x1)

Damper GrA S14 2.3L et 2.5L Motorsport - 854.00 HT (plus livrable)
Precio : 1024.80 € TTC (x2)

Silentbloc AV renforcé de support de pont - 45.80 HT
Precio : 54.78 € TTC (x1)

Pochette joints bas moteur - 134.50 € ht
Precio : 161.40 € TTC (x1)

Palier central d'arbre de transmission (entraxe 140) - 195.00 HT
Precio : 234.00 € TTC (x1)
Mécanisme embrayage renforcé (uniquement boîte manuelle)- 382.94 HT
Precio : 458.00 € TTC (x1)

Palier central d'arbre de transmission (entraxe 130) - 195.00 HT
Precio : 234.00 € TTC (x1)

Kit cales butée pour montage embrayage bi-disques avec Volant moteur EVO2 - 53.51 HT
Precio : 64.00 € TTC (x1)

Damper : moyeu AV de vilebrequin usiné, poulie de damper Alu usinée pour adaptation couronne 60-2 - 474.92 HT
Precio : 568.00 € TTC (x1)

Pistons diamètre 89.90 (2 segments) pour montage avec les bielles forgées en H (prix pièce)- 298.00 HT
Precio : 356.41 € TTC (x1)

Potentiomètre papillon (S42) - 75.00 HT
Precio : 90.00 € TTC (x1)

Coupelles de ressort Supérieures Titane Echappement (prix pièce)- 53.51 HT
Precio : 64.00 € TTC (x1)
Couple court 3.91 (210mm)- 1285.00 HT
Precio : 1536.86 € TTC (x1)

Pompe à essence HP 6,5 BAR - 291.63 HT
Precio : 349.96 € TTC (x1)

Disque organique renforcé diam. 240 = 383.71 € HT
Precio : 460.45 € TTC (x1)
Collecteur 4 en 2 et 1 diamètre 54 mm - 849.50 HT
Precio : 1016.00 € TTC (x1)
1 coussinet de bielle Racing BMW M20 Trimétal = 102.26 € HT
Precio : 122.71 € TTC (x1)

Vitre de rétroviseur type PRODRIVE (verre/miroir)- 28.80 HT P.U.
Precio : 34.56 € TTC (x1)

Kit supports Alu pour carter AR de pont origine - 65.00 HT
Precio : 78.00 € TTC (x1)

Arbre de transmission GR.A - 885.00 HT
Precio : 1020.00 € TTC (x1)
Capteur de pression atmosphérique
Precio : 89.27 € TTC (x2)

Kit filtre régulation essence complet mono tuyau 5.2 bars = 443.33 HT
Precio : 532.00 € TTC (x1)

Tulipe GP pour boulon de cardan 10/150 (cynetique 108) - 278.00 HT (prix unitaire)
Precio : 333.60 € TTC (x1)
Kit suspension complet GT Rallye version non réglable - 2950.00 HT
Precio : 3540.00 € TTC (x1)

Piston diam. 86,40 pour alesage 86.50 pour course 85 axe de 18 - 336.00 HT
Precio : 403.20 € TTC (x1)

Joint de carter Inférieur (S42) Papier - 15.80 HT
Precio : 18.90 € TTC (x1)

Disque métal fritté 4 patins diam. 240 = 283.00 HT
Precio : 339.60 € TTC (x1)

Courroie Générale SP pour poulie alt. diam. 60 orig. - 35.00 HT
Precio : 42.00 € TTC (x1)

Biellette de barre stabilisatrice AR nue - 2 x 78.00 = 156.00 HT
Precio : 187.20 € TTC (x1)
Barre anti-rapprochement AV Inox - 163.00 HT
Precio : 195.60 € TTC (x1)
Couple court 3.73 (210mm)- 980.00 HT
Precio : 1172.08 € TTC (x1)

Carter AR de pont GR.A usiné - 195.00 HT
Precio : 234.00 € TTC (x1)

Mécanisme d'embrayage renforcé = 383.71 HT
Precio : 460.45 € TTC (x1)

Kit complet plaque AR Vilebrequin Motorsport - 75.28 HT
Precio : 90.03 € TTC (x1)

Véritable bol de disque AR GR.A 12T - 248.00 € HT (prix unitaire)
Precio : 297.60 € TTC (x2)
Boulons de bielle S42 suivant marque et modèle (prix sur demande de 19 à 30 euro)
Precio : 0.00 € TTC (x1)

Coussinets de palier Diamètre 50 Moteur S42V98 (prix pièce)- 98.90 HT
Precio : 118.68 € TTC (x1)
Arbre à cames ECH S42 280° 12.70 de levée - 650.00 HT
Precio : 780.00 € TTC (x1)

Capteur de régime long S14 / S42
Precio : 113.62 € TTC (x1)

Ressorts 2 x 129.60 HT - 259.20 HT
Precio : 311.04 € TTC (x1)
Kit phasage Complet pour S14 (support / doigt / capteur)
Precio : 263.12 € TTC (x1)

Option disque flottant - 2 x 149.55 = 299.10 HT (pièce et usinage)
Precio : 358.92 € TTC (x2)

Supports étrier pour fusée d'origine (nu) - 2 x 288.00 = 576.00 € HT
Precio : 595.20 € TTC (x1)

Connecteur boîtier SRA-E pour faisceau - 80.00 HT
Precio : 95.68 € TTC (x1)
Faisceau moteur Double rampe (8 injecteurs)
Precio : 1495.00 € TTC (x1)

Kit complet EVO 1 avec disques (356), étriers AP 6 pistons, bols, jeu de plaquettes et kit boulons/cales de fixation
Precio : 0.00 € TTC (x1)
Faisceau moteur Simple rampe (4 injecteurs)
Precio : 1291.68 € TTC (x1)

Chapeau de ressort incurvé pour gain débattement ressort - 54.00 HT pièce
Precio : 64.80 € TTC (x1)

Disques de frein EVO 1 (diamètre 356/32 48V) Poids 6.5kg - 2 x 583.00 HT - 1166.00 HT
Precio : 1399.20 € TTC (x1)

Etriers de frein AR AP 4 pistons 2 x 659.78 HT - 1319.56 HT
Precio : 1583.47 € TTC (x1)

Anodisation de nos pièces Alu Couleurs au choix : noir, bleu, rouge, orange (prix par pièce de 15 à 30 euros selon modèle)
Precio : 0.00 € TTC (x1)

Plaque support de maître cylindre Alu - 78.00 HT
Precio : 93.60 € TTC (x1)

Cardans pleins pour version XXL diamètre 112 en Echg std - 2 x 529.68 HT = 1059.36 HT
Precio : 1271.23 € TTC (x1)
Filtre à air Haute Performance pour montage origine (nettoyable)- 53.51 HT
Precio : 64.00 € TTC (x1)

Réservoir souple rond 45 litres, adapté à notre montage (avec jauge et accessoires) - 1280.00 HT
Precio : 1536.00 € TTC (x1)

Pont complet Fonte avec autobloquant à 75 % et couple 5.71 (44.5 kg)- 4782.61 HT
Precio : 5739.13 € TTC (x1)

Frein à main complet - 189.80 HT
Precio : 227.76 € TTC (x1)

Limiteur, répartiteur hydraulique de pression à molette - 268.90 HT
Precio : 322.68 € TTC (x1)

Filtre à air Haute Performance pour montage origine (nettoyable)- 54.22 HT
Precio : 64.85 € TTC (x1)
Kit aérokip complet - 479.93 HT
Precio : 575.92 € TTC (x1)

Etrier de frein AR 4P AP pour fusée orig. S1 = 2 x 658.00 = 1316.00 HT
Precio : 1579.20 € TTC (x1)

Maître Cylindre de frein à main - 106.19 HT
Precio : 127.43 € TTC (x1)

Silencieux latéral avec ses sorties - 805.00 HT
Precio : 966.00 € TTC (x1)

Fusées type origine 2 x 218.65 HT - 437.30 HT
Precio : 523.00 € TTC (x1)

Kit vis et écrous pour flector renforcé - 35.59 HT
Precio : 42.71 € TTC (x1)

Poussoirs Motorsport 3.30 / 42 grammes (prix unitaire)- 117.00 HT
Precio : 139.93 € TTC (x1)

Supports étriers AR 2 x 87.73 HT - 175.46 HT
Precio : 210.55 € TTC (x1)

Poulie crantée de tendeur de D.A - 8.50 HT
Precio : 10.20 € TTC (x1)
Jambes filetées (seules) 2 x 329.85 HT - 659.70 HT
Precio : 791.64 € TTC (x1)

Kit chasse silentblocs durs excentrés - 91.70 HT
Precio : 109.67 € TTC (x1)

Silentbloc à encastrer de support moteur Gauche (S14)- 25.00 HT
Precio : 29.90 € TTC (x1)

Joint de nez de pont - 35.38 HT
Precio : 42.46 € TTC (x1)

Tableau de bord complet : plaque support instrumentation Alu, manomètres, voyants à partir de 630.00 € HT
Precio : 0.00 € TTC (x1)
ECHAPPEMENT SPORT : Silencieux AR Inox avec 2 x 2 sorties diamètre 76 mm - 1265.05 HT
Precio : 1513.00 € TTC (x1)

Fusées spéciales EVO 1/2/3 2 x 390.00 HT - 780.00 HT
Precio : 932.88 € TTC (x1)

combiné AV "côte / circuit" - 450.00 HT (prix unitaire)
Precio : 540.00 € TTC (x1)

Biellette de direction Complète (prix unitaire)- 199.83 HT
Precio : 239.00 € TTC (x1)
Kit entretoise alu rotule de 20 train AR - 2 x 34.25 = 68.50 ht
Precio : 137.00 € TTC (x1)

Supports de chasse réglables pour triangles origines - 2 x 168.00 = 336.00 HT
Precio : 403.20 € TTC (x1)

Porte filtre à air GrA pour passage pompe DA - 230.00 € HT
Precio : 276.00 € TTC (x1)
Capteur phasage S14
Precio : 114.22 € TTC (x1)

Coussinets de bielle Motorsport Diamètre 45 Moteur S14/7 (Prix unitaire)- 49.90 HT
Precio : 59.88 € TTC (x1)
Supports à souder 2 x 34.70 HT - 69.40 HT
Precio : 83.00 € TTC (x1)

Sonde température eau
Precio : 53.22 € TTC (x1)

Plaque AR porte joint de vilebrequin - 23.41 HT
Precio : 28.00 € TTC (x1)

Attache pot échappement en inox à souder - 18.00 HT
Precio : 21.60 € TTC (x1)

Pour pouvoir monter le kit il faut faire 2 chapes spéciales de renfort sur
les longerons du véhicules 2 X 35 = 70.00 HT
Precio : 84.00 € TTC (x1)

Jeu de plaquettes AR de frein (pour étrier fusée AR orig.) = 165.00 HT
Precio : 198.00 € TTC (x1)

Disque de frein AR diam. 304/25 = 2 x 452.00 = 904.00 HT
Precio : 1084.00 € TTC (x1)
Berceau origine "de base" - 400.00 HT
Precio : 480.00 € TTC (x1)
Total : 132661.47 € TTC